Publish Time: 2022-04-28 Origin: Site
All raw materials of rotomolded boxes are made of imported polyethylene (PE). The special material is non-toxic, anti-radiation, non-discoloration, anti-collision, etc. Therefore, rotomolded boxes can be used outdoor for a long time. Rotomolded boxes have a uniform wall thickness, no seams, no residual force in the product, not easy to deform. The color change is easy. When you want to change the color of the rotomolded box, you only need to clean the mold. At present, roto-molding equipment can produce not only small products with simple structure and single-layer rotomolded boxes, but also complex structure, multi-layer, large and super-large rotomolded box products, including various container-type products, motorized tools such as automobile and aircraft accessories, military supplies, ships, and human organs, etc. Therefore, rotomolded boxes are bound to become the second choice for more people. The following is a detailed introduction to the rotomolding box and the precautions when using it.
The following article contains
The detailed product introduction of high-quality rotomolded box
About the technical parameters of rotomolded box
Notes on the use of rotomolded boxes
Rotomolded box material: imported polyethylene plastic material
Common colors of rotomolded box: blue, white, black, orange
Performance: The rotomolded box is made of imported PE material, rotomolded at one time. It has the characteristics of hygiene, lightweight, strong corrosion-resistance, shock resistance and impact resistance, UV resistance, and is not easy to age.
Application: Rotomolded box is suitable for water treatment, environmental protection, electronics, chemical, food, medicine, construction, and other industries.
Product advantages: Rotomolded boxes are smooth inside and outside, with good hygiene and anti-UV capability. In addition, rotomolded boxes are impact-resistant, shock resistant, not easy to age, no algae, easy to clean, rodent-proof, termite-proof, easy to install and move.
Application of rotomolded boxes: Rotomolded boxes are also widely used for storage and transportation of secondary water supply, water storage, water treatment and purification equipment, electronics industry, industrial cooling water, chemical preparations, chemical raw materials, various oils, and beverages in high-rise buildings.
1.Rotomolded box has good integrity in one molding, no welding seam, never leaking, strong impact resistance, high tensile strength, rotomolded box has good anti-oxidation and anti-aging properties, in line with health food standards.
2. Due to the excellent performance of linear low-density polyethylene (LLDPE) and the special structure of the rotomolded box, the service life is up to 10 years or more.
3. The chemical resistance of rotomolded box is excellent, except for a few solutions that can swell the rotomolded box, almost can resist most of the material solutions.
4. Rotomolded boxes have the characteristics of internal and external corrosion resistance and can be placed in highly corrosive environments.
5. General rotomolded box use conditions for room temperature, normal pressure; special circumstances, rotomolded box use conditions can be less than 70 ℃ temperature and hydraulic pressure less than 1kg/cm2.
1. Each rotomolded box opens two holes for the water inlet and outlet, with special requirements set separately.
2. The roofing rotomolded box should be placed on the stairway opening or platform in good condition of force.
3. Rotomolded box is a universal container, so the control level should be installed with the float or other effective control devices.
4.After assembling the rotomolded box, close the outlet pipe and drain pipe and open the inlet pipe, check the water while releasing it until it is full of water. 12 hours without leakage is qualified for the rotomolded box.
5. The rotomolded box should be cleaned regularly to prevent debris from rushing into the box when testing the water.
6. General rotomolded box use conditions for room temperature, atmospheric pressure, paint plastic anti-corrosion.
7. Rotomolded box has a very big advantage in the large size of large volume products, despite the large size of the rotomolded box, but still maintain the characteristics of the integrity of a molding, which is not reached by other storage tank process.
8. In special cases, customers should contact the supplier by phone as much as possible before installation to consulting clearly before installation.
Shanghai Jingyao Industrial Co., Ltd is a modern enterprise specializing in the development, production, processing, and sales of rotomolded products. For your questions about rotomolded boxes and other rotomolded products, we will be able to respond to your requests.