This browser does not support the video element.
Insulated Ice Storage Box
Commercial Ice Caddies for Beverage And Meal Service Insulated Big Ice Transport Ice Storage Box Container Ice Box Container
Product process principle
The basic process of rotational moulding is to heat a powdered or liquid polymer in a mold that rotates and spins around a vertical axis before cooling and forming.
At the start of the heating stage, if the powder material is used, a porous layer is formed on the surface of the mold, and then gradually melted with the circulation process, and finally a homogeneous layer of uniform thickness is formed.
The mold is then put to the cooling area, cooled by forced wind or water spraying, and placed in the work area, where the mold is opened, the finished parts are removed, and the next cycle is carried on.
Name | Ice Box/Ice Storage Cart/Insulated Ice Caddy |
Outer Size(cm) | 79x60x74 |
Inner Size(cm) | 60x43x43.5 |
Capacity | 110L |
Weight capacity(Ice) | 57KG |
Net weight | 24.8kgs |
Package weight | 26kgs |
Case Pack | 1 unit |
Packaged size(cm) | 80x62x76.5 |
Features
-LLDPE body and thick foam insulation hold ice for hours.
-Will not crack, dent, bubble, chip, rust or break.
-Unique sliding lid slides back and under, reducing risk of cross contamination and saving space.
-Recessed well and drain shelf keep ice out of water, extending holding times.
-Molded-in handles ease maneuvering.
-Easy to clean.
-No assembly require
Packaging & Shipping